 Our standard PC configurations meet the strict specifications required for use
in hazardous locations and Europe's CE mark. Based on CPU boards designed
specifically for industrial automation, these systems provide the capabilities
required by demanding applications. With an installed base of over 300,000
systems, our industrial PC products are successfully applied in manufacturing
and process environments world-wide.
  
FEATURES |
Higher Performance Low
powerThe 1547 utilizes an Intel mobile processor providing superior processing power
while utilizing half the wattage of a comparable Pentium 4 processor. The
optional Pentium M 2.0 GHz processor (2M CACHE & 533 MHz system bus)
outperforms a desktop Pentium 4- 2.4 GHz (512 K CACHE & 533 MHz bus) while
utilizing half the wattage. The increased processing power with less heat
generation makes the 1546 ideal for most factory automation applications
requiring a NEMA enclosure. Less wattage input into the system results in less
temperature rise in the enclosure. In turn, the maximum ambient operating
temperature is more easily maintained, possibly without the need for expensive
enclosure cooling devices.
|
|
 |
Superior Video PerformanceThe on-board 4X AGP graphics controller
defaults to 4 MB system RAM which allows full color resolution up to 1280 x 1024
resolution. In addition, the 1547 will automatically share up to 32 MB system
RAM to allow full 32-bit color depth and fast 3D rendering and graphics
performance.
|
|
Fits Your NeedsThe 1547 can be configured many different ways. With
four available expansion slots, many cost effective, industry standard options
are easily integrated. The optional dual hard drive, externally accessible
CompactFlash, or RAID-enabled configuration provides the storage solution you
require. Additionally, the CD-ROM can be upgraded to CD-R/W or DVD-R/W providing
even more storage and backup options.
|
|
Meets High StandardsTo survive on the plant floor, the 1547 meets FCC, UL, cUL, and European CE mark
requirements for industrial automation equipment. Xycom Automation leads the
industry in reliability, service, and support with an optional five year
warranty available. |
|
Serviceability With the cover removed expansion cards are easily installed in the 1547 without
cumbersome cables to contend with. |
|
Easily Replaceable Hard Drive The 1547 unit has incorporated a simple to access hard drive mount. Simply
loosen two captive screws and extract the hard drive. No cables to install or
connect. Simply plug in the new drive. Optional dual hard drives or RAID-enabled
configurations are also available. |
|
Storage Options The 1547 series offers several data storage options. The standard unit contains
a single Serial ATA hard drive. Dual drives are optional, as well as a
RAID-enabled configuration. Also, the externally accessible Type I/II
CompactFlash can be used to further enhance your storage capabilities. The
CompactFlash can be ordered with the operating system pre-loaded for a solid
state alternative. The 4600 series offers a read-only CD-ROM, a CD-R/W with
DVD-Read capability, a DVD-R/W, or a floppy for your choice of removable media
drives. In addition, the 4 USB 2.0 ports can be utilized to add many
commercially available external devices. |
|
Mounting OptionsThe 1547 offers two mounting options: Vertical and
horizontal. |
|
ADDITIONAL FEATURES
- Intel Celeron M 1.3 GHz, 512 cache, 400 MHz system bus (optional Pentium M
2.0 GHz, 2M cache, 533 MHz system bus)
- Up to 2 GB DRAM (512 MB standard)
- 40 GB minimum Serial ATA hard drive (Optional dual hard drives)
- Up to 2GB optional DRAM
- 4X AGP graphics with 32 MB video memory (shared with system memory)
- Four available expansion slots:
- Three PCI expansion slots;
- One PCI or ISA expansion slot
- 10/100, and 10/100/1000 Base-T Ethernet
- Four USB 2.0 compliant ports (one additional 1.1 compliant port on front of
KPM units)
- Three Serial, one Parallel, and one Video port
- Rear accessible Type I/II CompactFlash socket
- CD-ROM (optional CD-R/W with DVD-read-only, DVD-R/W and floppy)
- UL, cUL, CE approvals
- UL listed for hazardous locations: Class I Division 2, Groups A, B C, D;
Class II Division 2, Groups F and G
- Windows XP or 2000 operating systems
- 100-240 VAC power supply
|
|
| |
|
Back to IPC Home
