 Xycom Automation industrial computers (IPCs) are designed to provide processing
power and versatility. The 4117T IPC offers a powerful processor with a wide
range of features and an expansion slot. The 4117T also meets the rigorous
requirements of the plant floor with a high-resolution LCD flat panel display in
a rugged housing ideal for today's manufacturing environment.
  
FEATURES |
Higher PerformanceThe 4117T utilizes an Intel mobile processor providing superior processing power
while utilizing half the wattage of a comparable Pentium 4 processor. The
Pentium M 1.4 GHz processor out performs the desktop Pentium 4 2.0 GHz used in
the 4115T while utilizing less wattage. The increased processing power with less
heat generation makes the 4117T ideal for most factory automation applications
requiring a NEMA enclosure. Less wattage input into the system results in less
temperature rise in the enclosure. With less temperature rise the maximum
ambient operating temperature is more easily maintained, possibly without the
need for expensive enclosure cooling devices.
|
|
 |
Sharp, Easy-to-Read DisplaysThe 4117T incorporates a bright 17.0" LCD with SXGA (1280 x 1024) resolution and
an analog resistive touchscreen into a thin light-duty industrial PC. The
on-board 4X AGP graphics controller provides full color resolution when
displaying a 1280 x 1024 application screen. |
|
Full Complement of I/O PortsThe 4117T comes standard with an extensive array of I/O ports (see photo below),
including three high speed RS-232 ports, one parallel port, 2 USB 2.0 compliant
ports, PS/2 mouse & keyboard ports, one 10/100 & one 10/100/1000 Mbps
Base-T Ethernet ports, one VGA port, and audio ports (in/out/mic). In addition a
half-length PCI and Type I/II CompactFlash card can also be added to even
further enhance your I/O needs. The VGA port can be utilized to connect a VGA
monitor. The built-in display and an additional monitor can be utilized
simultaneously (both showing the same image). |
|
Cooling EnhancementsWhen installing your 4117T into an enclosure, extra care should be exercised to
ensure that the ambient air around the unit (inside your enclosure, not outside
the enclosure) does not exceed 50캜. Exceeding 50캜 may cause premature
degeneration of the unit. Even though the 4117T utilizes a lower wattage Pentium
M processor than the Pentium 4 based 4115T care still needs to be exercised when
installing the 4117T into an undersized enclosure. Consult your enclosure
manufacturer for proper sizing and/or cooling options. The product
specifications and ratings section of this datasheet contains the information
your enclosure manufacturer will require. |
|
ADDITIONAL FEATURES
- 17" SXGA (1280 x 1024) color flat panel display
- Analog resistive touchscreen
- Intel?Pentium M 1.4 GHz CPU, w/ 2M Cache, 400 MHz system bus
- 4X AGP Video Controller, 512 MB DRAM (up to 2GB optional)
- VGA port for remote monitor
- Supports using remote monitor and built-in display simultaneously
- Preloaded with Windows?XP operating system (Windows 2000 optional)
- One half-length PCI expansion slot
- 80 GB Internal IDE Hard Drive
- Side access CD-R/W w/ DVD Read capability (optional DVD-R/W drive)
- Type I/II CompactFlash?card slot
- 3 RS-232 ports
- Parallel port
- Two USB 2.0 ports
- 10/100 and 10/100/1000 Base-T Ethernet ports
- Audio input/output/mic
- PS/2 keyboard & mouse ports
- Mounted with mounting clips or standard 100 mm VESA arm
- Power cable and drivers included
- 100-240 VAC power supply
- NEMA 4/4X/12, IP65 front panel
- 1-year warranty
* Important Notice for XP configurations: Certain Microsoft?software
product(s) included with this ccomputer may use technological measures for copy
protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT
FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation
procedures and Microsoft's privacy policy will be detailed during initial launch
of the product, or upon certain reinstallations of the software product(s) or
reconfigurations of this computer, or may be completed by Internet or telephone
(toll charges may apply). |
|
TECHNICAL SPECIFICATIONS:Display: 17" LCD color display,1280 x 1024 color flat
panel display
Operator Input: Analog resistive touchscreen
Processor: Intel?Pentium M
1.4 GHz CPU, w/ 2M Cache, 400 MHz system bus
Expansion: One half-length PCI |
|
SPECIFICATIONS:Electrical:
200 Watt AC, 100-240 VAC, 1.0 Amp, 50-60 Hz, 95 Watts
nominal power.*
* Nominal Power is measured for a standard minimum
configuration only. Any additional expansion and/or devices will increase the
input power required.
|
|
STANDARDS & RATINGSFront Panel:
NEMA 4/4X/12 |
|
COMPLIANCE- CE (EN 55022, Class A
- EN 6100-6-2
- IEC 60950-1
- EN 61000-3-2,
Class A
- EN 61000-3-3)
FCC (47 CFR, Part 15, Class A)
Safety Agency Approvals:
- UL (UL 508) Listed
- cUL
(CSA-C22.2, #142) Listed
-RoHS Compliant |
|
DIMENSIONSHeight: 14.0" (355.6 mm)
Width: 17.8" (452.1 mm)
Depth: 5.32" (135.1 mm)
Mounting Depth: 4.93" (125.2 mm)
Weight: 29 lbs (13.15 kg)
Mounting Dimensions (cutout):
Height: 13.1" [332.74 mm]
Width: 16.75" [344.93 mm]
Mounting Options:
The 4117T is
designed to be mounted directly into an equipment panel without requiring
special mounting plates or brackets.
It can also be mounted on a wall
with the wall-mount adapter included in the mounting kit or it can be mounted on
a standard 100 mm VESA swing or pendent arm. The 4117T is not NEMA rated if
mounted outside of a panel. |
|
WARRANTYThe 4117T carries a one-year parts & labor warranty.
|
|
HOW TO ORDERBase Order Number: 4117T-1400-512-CDW-XP
Description: 4117T
Industrial PC with a Intel?Pentium?M, 1.4 GHz CPU, 2M cache, 400 MHz system bus,
512 MB DRAM, 80 GB hard drive, CD-R/W (w/ DVD Read Only capabilities), and
Windows XP operating system. |
| |
Back to IPC Home
