 |
4615 Heavy-Duty Industrial PCs with 15.0" LCD Flat Panel
| Xycom Automation's newest generation of industrial PCs are designed and tested
for the tough environments required for plant floor use. |
 Our standard PC configurations meet the strict specifications required for use
in hazardous locations and Europe's CE mark. Based on CPU boards designed
specifically for industrial automation, these systems provide the capabilities
required by demanding applications. With an installed base of over 300,000
systems, our industrial PC products are successfully applied in manufacturing
and process environments world-wide.
  
FEATURES |
Higher Performance Low
powerThe 4615 utilizes an Intel mobile processor providing superior processing power
while utilizing half the wattage of a comparable Pentium 4 Processor. The
optional Pentium M 2.0 GHz processor (2 M CACHE & 533 MHz system bus)
outperforms a desktop Pentium 4 2.4 GHz (512 K CACHE & 533 MHz bus) while
utilizing less than half the wattage. With less wattage input the ambient
operating temperature is more easily maintained, possibly without the need for
expansive enclosure cooling devices. This makes the 4600 series ideal for
applications which require a NEMA sealed enclosure.
|
|
 |
Sharp, Easy-to-Read DisplaysThe 4615 units utilize bright TFT LCD flat panel displays. Complex operations
and screens can be displayed with clarity. The 4615 units incorporate a 15.0"
XGA (1024 x 768) resolution. The on-board 4X AGP graphics controller defaults to
4 MB system RAM to allow resolutions up to 1280 x 1024. In addition, the 4615
units automatically share up to 32 MB system RAM to allow full 32-bit color
depth and fast 3D rendering.
Fits Your Needs
The 4615 can be
configured many different ways. With four available expansion slots, many cost
effective, industry standard options are easily integrated. The optional dual
hard drive, externally accessible CompactFlash?? or RAID-enabled configuration
provides the storage solution you require. Additionally the CD-ROM can be
upgraded to CD-R/W or DVD-R/W providing even more storage and/or backup options.
|
|
Meets High StandardsTo survive on the plant floor, the 4600 series meet
FCC, UL, cUL, and European CE mark requirements for industrial automation
equipment. Xycom Automation leads the industry in reliability, service, and
support with an optional five year warranty available. |
|
Serviceability The 4600 series CPU section easily removes from the front
panel and display unit without having to detach the front panel from the NEMA
enclosure. The rear CPU section can be replaced with another very quickly. With
the cover removed expansion cards are easily installed without cumbersome cables
to contend with. |
|
Easily Replaceable Hard Drive The 4612 & 4615 units have
incorporated an easy access hard drive mount. Simply loosen two captive screws
and extract the hard drive. No cables to install or connect; simply plug in the
new drive. Optional dual hard drives or RAID-enabled configurations are also
available. |
|
Storage Options The 4600 series offers several data storage options. The
standard unit contains a single Serial ATA hard drive. Dual drives are optional,
as well as a RAID-enabled configuration. Also, the externally accessible Type
I/II CompactFlash can be used to further enhance your storage capabilities. The
CompactFlash can be ordered with the operating system pre-loaded for a solid
state alternative. The 4600 series offers a read-only CD-ROM, R/W, or a floppy
for your choice of removable media drives. In addition, the 4 USB 2.0 ports (one
additional 1.1 compliant port on front of KPM units) can be utilized to add many
commercially available external devices. |
|
ADDITIONAL FEATURES
- 15.0" SVGA TFT color flat panel
- Reprogrammable keypad with integrated mouse, touchscreen only, or both
- Intel Celeron M 1.3 GHz, 512 cache, 400 MHz system bus (optional Pentium M
2.0 GHz, 2M cache, 533 MHz system bus)
- Up to 2 GB DRAM (512 MB standard)
- 40 GB minimum Serial ATA hard drive (optional dual hard drives)
- 4X AGP graphics with 32 MB video memory (shared with system memory)
- Four available expansion slots:
- One (8.0" max.) PCI expansion slot;
- Two (9.0" max.) PCI expansion slots;
- One (9.0"max.) PCI or ISA expansion slot
- 10/100 and 10/100/1000 BaseT Ethernet
- Four USB 2.0 compliant ports (one additional 1.1 compatible prot on front of
KPM units)
- Three Serial, one Parallel, and one Video port
- Rear accessible Type I/II CompactFlash socket
- CD-ROM (optional CD-R/W with DVD-read-only, DVD-R/W, and floppy)
- NEMA 4/4x/12 front panel
- UL, cUL, CE approvals
- UL listed for hazardous locations: Class I Division 2, Groups A, B, C, D;
Class II Dvision 2, Groups F and G
- Windows XP and 2000 operating system
- 100-240 VAC power supply
Important Notice for Windows XP configurations: Certain Microsoft software
product(s) included with this computer may use technological measures for copy
protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT
FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation
procedures and Microsoft's privacy policy will be detailed during initial launch
of the product, or upon certain reinstallations of the software product(s) or
reconfigurations of this computer, or may be completed by Internet or telephone
(toll charges may apply). |
|
| |
|
REFERENCE LIBRARY:
|
|
|
|
Back to IPC Home
