NEW!! 3712KPM(T)
Industrial PCs
Xycom Automation's newest generation of industrial PCs is designed and
tested for the tough environments required for plant floor use. Our standard PC
configurations meet the strict specifications required for use in hazardous
locations and Europe's CE mark. Based on CPU boards designed specifically for
industrial automation, these systems provide the capabilities required by
demanding applications. With an installed base of over 200,000 systems, our
industrial PC products are successfully applied in manufacturing and process
environments world-wide. Easy-to-Read
Display
The 3712 units utilize a bright TFT 15.0" LCD
flat panel display. Complex operations and screens can be displayed with
clarity. XGA (1024 x 768) resolution is recommended. However, the 3712 units
will display SXGA (1280 x 1024) resolution with some clarity degradation. The
AGP graphics defaults to 4MB video RAM and will automatically share RAM (up to
32 MB) with the system to allow full 32-bit color depth.
 Higher
Performance
With up to 1.26GHz Pentium III processors
available, the 3712 units can drive the most demanding applications. The 3712
units ship standard with an 850 MHz Celeron with 128K cache running at 100 MHz
bus. Optional 1.0 GHZ with 256K cache and 1.26GHz with 512K cache, both running
at 133 MHz bus, are available options.
Fits Your
Needs
The 3712 units can be configured many
different ways. With four available expansion slots (three ¾-length ISA/PCI, one
½-length PCI), many cost effective, industry standard options are easily
integrated. The optional dual hard drive, externally accessible Compact Flash,
or external drive bay connector provide the storage solution you require.
Additionally, the CD-ROM can be upgraded to a read/write drive so that even more
storage and/or backup options are available. The optional 9000-XBAY allows you
to externally mount any two IDE devices without requiring a power supply or
unreliable cabling.
Meets High Standards
To survive on the plant floor, the 3712 units
meet NEMA 4/4x/12, IP65, FCC, UL, cUL, and European CE mark requirements for
industrial automation equipment. Xycom Automation leads the industry in
reliability, service, and support with an optional five year warranty available.
FEATURES:
Additional 3712
Features:
- 12.1" SVGA TFT color flat panel
- Choice of operator input options:
- Reprogrammable keypad with integrated
mouse, or
- Combination of keypad, mouse & analog
resistive touchscreen
- Intel® Celeron® and Pentium® III options
up to 1.26GHz
- Up to 512 MB DRAM
- 10/100 Base T Ethernet port
- RS-232 port
- RS-232 or RS-485 port
- Parallel port
- PS/2 ports (front and rear
accessible)
- USB (1.1) ports (front and rear
accessible)
- VGA port (supports simultaneous display
with additional monitor)
- Four available expansion slots:
- Three full-length (1 PCI, 1 ISA, and 1
either ISA or PCI)
- One ½-length PCI
- DiskOnChip 2000 socket
- CD-ROM and Floppy with optional CD-R/W
upgrade
- Easily removable 20 GB hard drive
- Secondary IDE Drive options (choice of
one):
- Dual hard drives
- Externally accessible CompactFlash™
options up to 512MB
- External Drive bay connector for
9000-XBAY
- UL 508 Listed
- NEMA 4/4x/12 and IP65 front panels UL
listed for hazardous locations: Class I Division 2, Groups A, B, C, D; Class II
Division 2, Groups F and G
- Pre-loaded with MS-DOS®,
Windows® 98, Windows® NT, Windows® 2000 (with
multilanguage support), or Windows® XP
Hardware/Software Bundled
Solutions:
The 3712 can also be
configured with OpenHMI™ and OpenCNTRL™ HMI and Control software:
REFERENCE LIBRARY:
|
Serviceability
Easily
Replaceable Hard Drive
Remote
Drives
