Easy-to-Read Display
The 3715 units utilize a bright TFT 15.0" LCD flat panel display. Complex operations and screens can be displayed with clarity. XGA (1024 x 768) resolution is recommended. However, the 3715 units will display SXGA (1280 x 1024) resolution with some clarity degradation. The AGP graphics defaults to 4MB video RAM and will automatically share RAM (up to 32 MB) with the system to allow full 32-bit color depth.

Higher Performance
With up to 1.26GHz Pentium III processors available, the 3715 units can drive the most demanding applications. The 3715 units ship standard with an 850 MHz Celeron with 128K cache running at 100 MHz bus. Optional 1.0 GHZ with 256K cache and 1.26GHz with 512K cache, both running at 133 MHz bus, are available options.

Fits Your Needs
The 3715 units can be configured many different ways. With four available expansion slots (three ¾-length ISA/PCI, one ½-length PCI), many cost effective, industry standard options are easily integrated. The optional dual hard drive, externally accessible Compact Flash, or external drive bay connector provide the storage solution you require. Additionally, the CD-ROM can be upgraded to a read/write drive so that even more storage and/or backup options are available. The optional 9000-XBAY allows you to externally mount any two IDE devices without requiring a power supply or unreliable cabling.

Meets High Standards
To survive on the plant floor, the 3715 units meet NEMA 4/4x/12, IP65, FCC, UL, cUL, and European CE mark requirements for industrial automation equipment. Xycom Automation leads the industry in reliability, service, and support with an optional five year warranty available.

FEATURES:

Serviceability The 3715 CPU section easily removes from the front panel and display unit without having to detach the front panel from the NEMA enclosure. One electrical connection is used to attach the entire front panel to the rear CPU section. The rear CPU section can be replaced with another very quickly. With the cover removed expansion cards are easily installed without cumbersome cables to contend with. Easily Replaceable Hard Drive The 3715 units have incorporated an easy access hard drive mount. Simply remove 2 screws and extract the hard drive. Remove the metal bracket and retention spring, attach it to the new hard drive and install your replacement. Secondary Drive Options The 3715 units have several options for the secondary IDE port on the CPU. The hard drive can be replaced with a dual hard drive unit. If solid state storage media is desired then an externally accessible Type I or Type II CompactFlash option is available. If a DVD, Tape backup, or other IDE device is required then an external connector for a remote drive bay can be ordered. Remote Drives With the external bay connector (shown above) installed, the 9000-XBAY* can be utilized. The 9000-XBAY allows any two IDE devices to be installed and connected to the 3715 unit via a single cable. When using a 9000-XBAY with the 3715 units, the internal power supply option must be chosen when configuring the 9000-XBAY. The 9000-XBAY can be mounted on a shelf, behind a panel, or used with a NEMA door (optional). *9000-XBAY and external power supply are both sold separately.

Additional 3615 Features:

• 15.0" XGA TFT color flat panel
  
• Choice of operator input options:
  • Analog resistive touchscreen only, or
  • Reprogrammable keypad with integrated mouse, or
  • Combination of keypad, mouse & touchscreen
• Intel® Celeron® and Pentium® III options up to 1.26GHz
  
• Up to 512 MB DRAM
  
• 10/100 BaseT Ethernet port
  
• RS-232 port
  
• RS-232 or RS485 port
  
• Parallel Port
  
• PS/2 keyboard and mouse port
  
• USB port
  
• VGA port (supports simultaneous display with additional monitor)
  
• Four available expansion slots:
  
  • Three full-length (1 PCI, 1 ISA, and 1 either ISA or PCI)
    
  • One ½-length PCI
    
• DiskOnChip 2000 socket
  
• CD-ROM and Floppy with optional CD-R/W upgrade
  
• Easily removable 20 GB hard drive
  
• Secondary IDE Drive options (choice of one):
  
  • Dual hard drives
    
  • Externally accessible CompactFlash™ options up to 512MB
    
  • External Drive bay connector for 9000-XBAY
    
• UL 508 Listed (pending)
• NEMA 4/4x/12 and IP65 front panel
  
• UL listed for hazardous locations: Class I Division 2, Groups A, B, C, D; Class II Division 2, Groups F and G (pending)
  
• Pre-loaded with MS-DOS®, Windows 98®, Windows® NT, Windows® 2000 (with multi-language support for 2000 only), or Windows XP
  

Please refer to product datasheet (below) for Product mounting Dimensions, Specifications and Ratings.

Hardware/Software Bundled Solutions:
The 3615 can also be configured with OpenHMI WW and IWS HMI and Control software :

REFERENCE LIBRARY:

3715 Family Datasheet

3715 Family User Manual

3715T Hi Res JPEG

3715KPM Hi Res JPEG